2 Token Number Display in one unit
Q managemnt system by calling 2 numbers simultaneously through number/token supplied with 5 meter wire
Q managemnt system by calling 2 numbers simultaneously through number/token supplied with 5 meter wire
Q managemnt system by calling 2 numbers simultaneously through number/token supplied with 5 meter wire
*CHECK & ENTER TOKEN NO. *ONE TOUCH RESET.
*FEATHER TOUCH KEYS. *ONE TOUCH INCREMENT.
*CHOICE OF INCREMENT OR DECREMENT. *ONE TOUCH INCREMENT
*ENTER FOR MAIN DISPLAY *CALL & RECALL SEPARATE.
*PLACE FOR PUBLICITY. *SINGLE OR MULTI TOKEN.
*DISPLAY 7 SEGMENT 2.3” / 4.0”. *Token No 3 or 4 digit
*PARALLEL UNIT FOR MAIN DISPLAY OR KEYPAD. (Optional as per requirement)
MAIN DISPLAY UNIT
The main Display unit is the large display unit to indicate & call the No. punched by the operator. The main display can be supplied in various sizes. The Size of the display depends on viewing distance & ambient light conditions. When the ENTER key is Pressed by the operator the “Token Number” appears on the main display with sound. The size can be 2.3" or 4.0" (Height of display) in 3 digits or 4 digits.
THE KEYBOARD UNIT: -
The keyboard unit is designed for the convenience of the operator to read & punch conveniently. There is no strain on Eyes. The keys are covered by a polycarbonate sheet which prevents dust/ oil accumulation on keys which is the reason of failure in most cases. The keys are self-explanatory. A small 12 mm display provides the read-out for operators to punch the right number, once he is satisfied he presses the ENTER key to transfer the token no. to the main display unit. One can connect two or more Main Display units to indicate the same Token Number at 2-3 different places. A 5 meter 25 core wire is supplied with 25 pin connector which needs to be laid down between Keyboard & Main Display Unit. Longer wire can be provided at an extra cost.