Q Management Token Calling System Two token

1.CHECK & ENTER TOKEN NO.   - 2.ONE TOUCH RESET.  -3. FEATHER TOUCH KEYS.   -4.  ONE TOUCH INCREMENT. 5. CHOICE OF INCREMENT OR DECREMENT.  -   6. ONE TOUCH INCREMENT  -   7. ENTER FOR MAIN DISPLAY CALL & RECALL SEPARATE.  - 8.PARALLEL UNIT FOR MAIN DISPLAY OR KEYPAD. (Optional as per requirement)  9.PLACE FOR PUBLICITY in MULTI TOKEN  DISPLAY 7 SEGMENT 2.3” Token No 3 + 3 digit

MAIN DISPLAY UNIT

Main Display unit is the large display unit to indicate & call the No. punched by the operator. The main display can be supplied 2.3" display. The Size of display depends on viewing distance & ambient light conditions. When the ENTER key is Pressed by the operator the “Token Number” appears on main display with sound. The size can be 2.3" (Height of display) in 3 digit. The numbers reflects at position A, operator has choice to send the number at position “A” or “B” He can send / cancel / Call / Recall any number at any place.

THE KEYBOARD UNIT: -

The keyboard unit is designed for the convenience of the operator to read & punch conveniently. There is no strain on the eyes. The keys are covered by a polycarbonate sheet, which prevents dust/ oil accumulation on keys, which is the reason of failure in most cases. The keys are self-explanatory. Small 12 mm display provides the readout for operators to punch the right number, once he is satisfied, he presses ENTER key to transfer the token no. to main display unit. One can connect two or more Main Display units to indicate same Token Number at 2-3 different places. A 5-meter 25-core wire is supplied with 25 pin connector which needs to laid down between Keyboard & Main Display Unit. A longer wire can be provided at an extra cost.